Motorized HEPA Filters; Ceiling Fan Filter Units, 24"x 48", Power Cord, CAP-119-424-H-PC

Fan Filter Units - FFU - Motorized HEPA Ceiling Filters - 2'x4' - Power Cord - CAP-119-424-H-PC

Please note that we have three choices in motorized HEPA filters and ceiling fan filters:
HEPA ceiling fan filter with a power cord (this product)
HEPA ceiling fan filter without a power cord
HEPA ceiling fan filter with pre-fab wiring included

The motorized fan filter units is an FFU or it is sometimes called a MCF (motorized ceiling filter). This module is a self-contained fan filter unit that draws air in through a top mounted prefilter.  It then blows the air out the other side through a HEPA or ULPA filter into a controlled space.  A typical installation application is into a 2' x 4' tee bar ceiling grid system. The units can also be mounted on a support frame or suspended from a support structure. The variable speed control is numbered 1 through 10 positions on the dial.

The galvanized steel blower housing screws to the top of an aluminum framed HEPA or ULPA filter. The internal direct drive blower/motor assembly is isolated from the exterior housing by torsion flex motor mounts and rubber vibration isolation mounts. 

Model CAP-119-424 motorized HEPA filter is UL 900 listed. 

REPLACING THE HEPA FILTER
The HEPA filter element is replaced by unscrewing the top metal blower housing from the aluminum HEPA filter frame and then re-attaching the top metal blower housing to the new filter element.  The HEPA filter element typically lasts for many years.

BLOWER AND MOTOR SPECIFICATIONS
• 1.8A motor
• 16 mf capacitor
• 185 watts NP (60 Hz)
• Backward incline blower wheel
• Low heat load due to an efficient assembly
• Variable speed control

FAN FILTER UNIT SIZE: 23 5/8" x 47 5/8" 

FAN FILTER UNIT CFM:
CFM: 700
Velocity:  115 LFPM
Amps:  1.4
Decibels: 53 dBa

FAN FILTER UNIT FEATURES
•  Low profile design: 15 ½" high
•  Lightweight: 90 pounds 
•  Galvanized metal plenum construction
•  Size: 47-5/8" x 23- 5/8"
•  Fiberglass Prefilter: 20"x20"x1"
•  90 ft./min average face velocity
•  HEPA filter efficiency: 99.99% at 0.3 microns
•  Operates at low, medium, and high speeds
•  On/Off switch
•  1/4 HP motor, PSC
•  120V, 50/60 Hz, 1.5 amps
•  Hanger holes
•  Protective filter face guard
•  Not a room side replaceable filter
•  Power cord is 14 feet long

FAN FILTER UNIT OPTIONS
• RELOC flexible metal plug-together cable
• Painted plenum
• Fluorescent flow-thru light
• 10 inch inlet collar for air conditioning
• 10 inch inlet collar with in line pre-filter 
• Ionization bar

FREIGHT SPECIFICATIONS 
•  Shipping Dimensions: 52" x 32" x 33"
•  Freight Class: 250
•  Weight: 110 lbs.

Product Code: CAP-119-424-H-PC - Motorized Ceiling HEPA Filter, Aluminum Framed Filter, 26.6" x 47.6", Prefilters: 20"x20"x1", Variable Speed Control, 120 Volt, 14 Ft Power Cord

For more options, visit our main cleanroom filters section.

TO ORDER FAN FILTER UNITS
To order the fan filter units, click tab above, call customer service at (303) 752-0076 or email sales@cleanroomworld.com

Shipping Instructions: The fan filter units price does not include freight. The fan filter unit ships on a motor freight carrier and the cost of shipping will be added to your order. Customer service will call or email you after the order is placed to give you the option of shipping the table collect on your account. Indicate to customer service if your facility will require a lift gate or if you have a dock high receiving area. Please include delivery point of contact name and phone number. Skid size for one FFU: 52" x 32" x 33". Skid Weight: 110 lbs

In addition to cleanroom filters, we also offer a variety of cleanroom equipment, including motorized shoe cleaners, cleanroom ceiling tiles, and particle counters. 

For more options, visit our main section for cleanroom construction components.

Click here to see our cleanroom ceiling tiles (vinyl coated).

1223CW