Nitrogen Spray Guns: N2, Front Trigger, Dispensed @ 90 degree, PTFE/FEP, Hose Assembly, 0.80 Filter, TA-NITRO-4T-FT

Nitrogen Guns - Dispensed @ 90 Degrees - Front Trigger - PTFE/FEP - 0.80 Filter - Hose Assembly  TA-NITRO-4T-FT

Nitrogen spray guns (also known as N2 spray guns), are used wherever hostile environments exist (such as those in semiconductor fab plants). The PTFE nitrogen spray guns deliver the optimum in anti-corrosion protection and long lasting duty wherever harsh chemicals are used in the vicinity of nitrogen dispensing/drying. Also, the nitrogen spray guns’ unique design eliminates costly nitrogen leaks (these leaks usually occur in conventional guns around the depress button).  Nitrogen spray guns are available individually or as assemblies with coiled hose.

FEATURES OF THE NITROGEN SPRAY GUN
The features of the nitrogen spray gun include:
•90-degree spray angle
•handle is molded from PVDF on the nitrogen spray gun
•single exit nozzle that’s 0.90 inches in diameter
•OSHA 1910.242(b) and 41 CFR-50-204.8 compliant with their filter and housing attached*
•includes one disposable TACODISC filter**
•the disposable TACODISC filter disks have a 25 mm diameter, copolymer filter element that’s sandwiched between and supported by 2 pieces of molded acrylic plastic

*As defined by the Occupational Safety and Health Administration, dead ending is a buildup of back pressure due to nozzle obstruction.  hen dead ending occurs pressure, is diverted out the side of the nozzle of the nitrogen spray gun assembly.

**Note that the size filter we use is a custom filter for our nitrogen spray gun only. We’re only able to offer the one filter, with a 0.80 micron hydrophilic membrane and a polypro/acrylic housing. A smaller micron filter is not available.

HOW TO CHOOSE A NITROGEN SPRAY GUN ASSEMBLY
Spray Direction: N2 spray dispensed straight out the top or 90 degree front spray
The pressure diverts out the side of the nozzle assembly when unable to leave the spray port. 
Hose: Blue coiled polyurethane (PU) hose is resistant to oils, solvents and weak acids/bases. PTFE/FEP is Teflon by Chemours a spin off of DuPont which offers the optimum in anti-corrosion protection to harsh chemicals.
Trigger Location: rear trigger with palm of the hand or front trigger FT finger activated

NITROGEN SPRAY GUN STYLES
TA-NITRO-1        Nitrogen gun, dispensed out the end, 1/4" FNPT port for N2 supply hookup, filter housing and filter. GUN ONLY NO HOSE
TA-NITRO-2        Nitrogen gun, dispensed 90 degree, rear trigger, 1/4" FNPT port for N2 supply hookup, filter housing and filter. GUN ONLY NO HOSE
TA-NTIRO-2-FT   Nitrogen gun, dispensed 90 degree, front trigger, 1/4" FNPT port for N2 supply hookup, filter housing and filter. GUN ONLY NO HOSE
TA-NTIRO-3        Nitrogen gun assembly, dispensed out the end, 1/4" blue coiled polyurethane hose assembly 7' long, (2) polypropylene male connectors, filter housing and filter 
TA-NITRO-3T       Nitrogen gun assembly, dispensed out the end, 1/4" PTFE/FEP coiled hose assembly, (2) PTFE male connectors, filter housing and filter.
TA-NITRO-4         Nitrogen gun assembly, dispensed @ 90º, 1/4" blue coiled polyurethane hose assembly 7' long, (2) polypropylene male connectors, filter housing and filter.  
TA-NITRO-4T        Nitrogen gun assembly, dispensed @ 90º, rear trigger, 1/4" PTFE/FEP coiled hose assembly, (2) PTFE male connectors, filter housing and filter.
TA-NITRO-4-FT     Nitrogen gun assembly, dispensed @ 90º, front trigger, 1/4" blue coiled polyurethane hose assembly, (2) polypropylene male connectors, filter housing and filter
TA-NITRO-4T-FT   Nitrogen gun assembly, dispensed @ 90º, front trigger, 1/4" PTFE/FE coiled hose assembly, (2) PTFE/FI male connectors, filter housing and filter

NITROGEN SPRAY GUN FLOW RATE
75 psi = 5.0 scfm
50 psi = 4.0 scfm
scfm: standard cubic feet per minute
psi: pounds per square inch

NITROGEN SPRAY GUN PACKAGING 
Each nitrogen spray gun is packaged in a 4 mil bag. Spray gun can be brought into a cleanroom gowning room, unpackaged, wiped down and brought into a cleanroom. Spray guns are cleaned throughout the manufacturing process. A final cleaning is done before packaging. DI water spray guns are packaged for a cleanroom environment.

NITROGEN SPRAY GUN OPERATING PRESSURE
Maximum operating pressure for all N2 spray guns is 75 PSI.

Product Code: TA-NITRO-4T-FT - Nitrogen Gun Assembly, N2 Dispensed @ 90º, Front Trigger, Includes:
(2ea) TA-MC-F-44  IPS male connector - PTFE.  1/4" tube x 1/4" MNPT Flexible coiled hose assembly #TA-C4-FEP.  1/4" OD FEP 

For more options, check out our complete selection of nitrogen spray guns for cleanrooms, labs and manufacturing facilities.

ORDER NITROGEN SPRAY GUNS
To order the nitrogen spray guns, click tab above, email sales@cleanroomworld.com or call customer service at (303)752-0076.

Shipping Instructions: The nitrogen guns can ship via UPS or FedEx. The order ships collect or prepay and add to the invoice. If shipping collect, add your freight account number in the “Comments Box” when checking out. Customer is responsible for the freight charge.

12223CW