Nitrogen Spray Guns: Front Trigger, GUN ONLY, No Hose, Dispensed @ 90 degree, 0.80 Filter, TA-NITRO-2-FT

Nitrogen Spray Guns - Dispensed @ 90 Degrees - Front Trigger  - .80 Filter - Gun Only - No Hose - TA-NITRO-2-FT

Nitrogen spray guns, (N2 spray guns), are used wherever hostile environments exist (such as those in semiconductor fab plants). The PTFE nitrogen spray guns deliver the optimum in anti-corrosion protection and long lasting duty wherever harsh chemicals are used in the vicinity of nitrogen dispensing/drying.  Made of PTFE and poly they resist acid fume attack. Also, the nitrogen spray guns’ unique design eliminates costly nitrogen leaks (these leaks usually occur in conventional guns around the depress button). Nitrogen spray guns are available individually or as assemblies with coiled hose. 

FEATURES OF THE NITROGEN SPRAY GUN
The features of the nitrogen spray gun include:
•90-degree spray angle
•handle is molded from PVDF on the nitrogen spray gun
•single exit nozzle that’s 0.90 inches in diameter
•OSHA 1910.242(b) and 41 CFR-50-204.8 compliant*
•includes one disposable TACODISC filter**
•the disposable TACODISC filter disks have a 25 mm diameter, copolymer filter element that’s sandwiched between and supported by 2 pieces of molded acrylic plastic

*As defined by the Occupational Safety and Health Administration, dead ending is a buildup of back pressure due to nozzle obstruction.  hen dead ending occurs pressure, is diverted out the side of the nozzle of the nitrogen spray gun assembly.

**Note that the size filter we use is a custom filter for our nitrogen spray gun only. We’re only able to offer the one filter, with a 0.80 micron hydrophilic membrane and a polypro/acrylic housing. A smaller micron filter is not available. 

HOW TO CHOOSE A NITROGEN SPRAY GUN ASSEMBLY
There are several factors to consider when choosing a nitrogen spray gun assembly.

Spray Direction Of The Nitrogen Spray Gun: You can choose between a model that sprays the N2 gas straight out of the top of the nitrogen spray gun, or one that sprays it from the front of the nitrogen spray gun (at a 90-degree angle).

Hose On The Nitrogen Spray Gun: For the hose on the nitrogen spray gun, you can choose a blue, coiled polyurethane (PU) hose which is resistant to oils, solvents, and weak acids and bases. Or you can choose a hose that is PTFE (FEP). This Teflon hose is made by Chemours (a spinoff of DuPont), and it provides a higher level of anti-corrosion protection from harsh chemicals.

Trigger Location On The Nitrogen Spray Gun: You can choose a nitrogen spray gun that has a rear trigger that you depress with the palm of your hand, or a front trigger that you activate with your finger.

Nozzle On The Nitrogen Spray Gun: Please note that all of our nitrogen spray guns have the same type of nozzle.

NITROGEN SPRAY GUN STYLES
TA-NITRO-1        Nitrogen gun, dispensed out the end, 1/4" FNPT port for N2 supply hookup, filter housing and filter. GUN ONLY NO HOSE
TA-NITRO-2        Nitrogen gun, dispensed 90 degree, rear trigger, 1/4" FNPT port for N2 supply hookup, filter housing and filter. GUN ONLY NO HOSE
TA-NTIRO-2-FT   Nitrogen gun, dispensed 90 degree, front trigger, 1/4" FNPT port for N2 supply hookup, filter housing and filter. GUN ONLY NO HOSE
TA-NTIRO-3        Nitrogen gun assembly, dispensed out the end, 1/4" blue coiled polyurethane hose assembly 7' long, (2) polypropylene male connectors, filter housing and filter 
TA-NITRO-3T       Nitrogen gun assembly, dispensed out the end, 1/4" PTFE/FEP coiled hose assembly, (2) PTFE male connectors, filter housing and filter.
TA-NITRO-4         Nitrogen gun assembly, dispensed @ 90º, 1/4" blue coiled polyurethane hose assembly 7' long, (2) polypropylene male connectors, filter housing and filter.  
TA-NITRO-4T        Nitrogen gun assembly, dispensed @ 90º, rear trigger, 1/4" PTFE/FEP coiled hose assembly, (2) PTFE male connectors, filter housing and filter.
TA-NITRO-4-FT     Nitrogen gun assembly, dispensed @ 90º, front trigger, 1/4" blue coiled polyurethane hose assembly, (2) polypropylene male connectors, filter housing and filter
TA-NITRO-4T-FT   Nitrogen gun assembly, dispensed @ 90º, front trigger, 1/4" PTFE/FE coiled hose assembly, (2) PTFE/FI male connectors, filter housing and filter

NITROGEN SPRAY GUN FLOW RATE
75 psi = 5.0 scfm
50 psi = 4.0 scfm
scfm: standard cubic feet per minute
psi: pounds per square inch

NITROGEN SPRAY GUN PACKAGING 
Each nitrogen spray gun is packaged in a 4 mil bag. Spray gun can be brought into a cleanroom gowning room, unpackaged, wiped down and brought into a cleanroom. Spray guns are cleaned throughout the manufacturing process. A final cleaning is done before packaging. Nitrogen spray guns are packaging for a cleanroom environment.

NITROGEN SPRAY GUN OPERATING PRESSURE
Maximum operating pressure for all N2 spray guns is 75 PSI.

Product Code: TA-NTIRO-2-FT - NITRO-2 with front trigger spray option (NITRO-2 only)  GUN ONLY NO HOSE

For more options, check out our complete selection of nitrogen spray guns and PTFE cleanroom parts.

ORDER NITROGEN SPRAY GUNS
To order the nitrogen spray guns, click tab above email sales@cleanroomworld.com or call customer service at (303)752-0076.

Shipping Instructions: The nitrogen guns can ship via UPS or FedEx. The order ships collect or prepay and add to the invoice. If shipping collect, add your freight account number in the “Comments Box” when checking out. Customer is responsible for the freight charge.

12123CW