Skip to main content

Nitrogen Spray Guns, ¼” Polyurethane Hose Assembly, Dispensed Out the End, 0.80 Filter, TA-NITRO-3

Starting at $194.00
(No reviews yet) Write a Review
Product Code:
TA-NITRO-3
Bulk Pricing:
Buy in bulk and save
Nitrogen Guns - Dispensed Out the End - 0.80 Filter - Gun & Hose Assembly - TA-NITRO-3

Nitrogen spray guns (known as N2 spray guns) are used wherever hostile environments exist (such as those in semiconductor fab plants).  The PTFE nitrogen spray guns deliver the optimum in anti-corrosion protection and long lasting duty wherever harsh chemicals are used in the vicinity of nitrogen dispensing/drying.  Made of PTFE and poly they resist acid fume attack. Also, the nitrogen spray guns’ unique design eliminates costly nitrogen leaks (these leaks usually occur in conventional guns around the depress button).  Nitrogen spray guns are available individually or as assemblies with coiled hose. 

Nitrogen spray gun comes with one disposable TACODISC filter included. The size filter we use is a custom filter for our gun only. We are only able to offer the one filter. .80 micron hydrophilic membrane, polypro/acrylic housing. Smaller micron filter is not available.

Disposable TACODISC filter discs have a 25mm diameter, copolymer filter element that's sandwiched between and supported by two pieces of molded acrylic plastic. 

HOW TO CHOOSE A NITROGEN SPRAY GUN ASSEMBLY
There are several factors to consider when choosing a nitrogen spray gun assembly.

Spray Direction Of The Nitrogen Spray Gun: You can choose between a model that sprays the N2 gas straight out of the top of the nitrogen spray gun, or one that sprays it from the front of the nitrogen spray gun (at a 90-degree angle).

Hose On The Nitrogen Spray Gun: For the hose on the nitrogen spray gun, you can choose a blue, coiled polyurethane (PU) hose which is resistant to oils, solvents, and weak acids and bases. Or you can choose a hose that is PTFE (FEP). This Teflon hose is made by Chemours (a spinoff of DuPont), and it provides a higher level of anti-corrosion protection from harsh chemicals.

Trigger Location On The Nitrogen Spray Gun: You can choose a nitrogen spray gun that has a rear trigger that you depress with the palm of your hand, or a front trigger that you activate with your finger.

Nozzle On The Nitrogen Spray Gun: Please note that all of our nitrogen spray guns have the same type of nozzle.

NITROGEN SPRAY GUN STYLES
TA-NITRO-1        Nitrogen gun, dispensed out the end, 1/4" FNPT port for N2 supply hookup, filter housing and filter. GUN ONLY NO HOSE
TA-NITRO-2        Nitrogen gun, dispensed 90 degree, rear trigger, 1/4" FNPT port for N2 supply hookup, filter housing and filter. GUN ONLY NO HOSE
TA-NTIRO-2-FT   Nitrogen gun, dispensed 90 degree, front trigger, 1/4" FNPT port for N2 supply hookup, filter housing and filter. GUN ONLY NO HOSE
TA-NTIRO-3        Nitrogen gun assembly, dispensed out the end, 1/4" blue coiled polyurethane hose assembly 7' long, (2) polypropylene male connectors, filter housing and filter 
TA-NITRO-3T       Nitrogen gun assembly, dispensed out the end, 1/4" PTFE/FEP coiled hose assembly, (2) PTFE male connectors, filter housing and filter.
TA-NITRO-4         Nitrogen gun assembly, dispensed @ 90º, 1/4" blue coiled polyurethane hose assembly 7' long, (2) polypropylene male connectors, filter housing and filter.  
TA-NITRO-4T        Nitrogen gun assembly, dispensed @ 90º, rear trigger, 1/4" PTFE/FEP coiled hose assembly, (2) PTFE male connectors, filter housing and filter.
TA-NITRO-4-FT     Nitrogen gun assembly, dispensed @ 90º, front trigger, 1/4" blue coiled polyurethane hose assembly, (2) polypropylene male connectors, filter housing and filter
TA-NITRO-4T-FT   Nitrogen gun assembly, dispensed @ 90º, front trigger, 1/4" PTFE/FE coiled hose assembly, (2) PTFE/FI male connectors, filter housing and filter

NITROGEN SPRAY GUN FLOW RATE
75 psi = 5.0 scfm
50 psi = 4.0 scfm
scfm: standard cubic feet per minute
psi: pounds per square inch

NITROGEN SPRAY GUN PACKAGING 
Each nitrogen spray gun is packaged in a 4 mil bag.  Spray gun can be brought into a cleanroom gowning room, unpackaged, wiped down and brought into a cleanroom.  Spray guns are cleaned throughout the manufacturing process. A final cleaning is done before packaging. Nitrogen spray guns are packaging for a cleanroom environment.

NITROGEN SPRAY GUN OPERATING PRESSURE
Maximum operating pressure for all N2 spray guns is 75 PSI.

Product Code: TA-NITRO-3  Nitrogen Spray Gun, N2 Dispensed Out the End, Includes: (2) #TA-J44 JACO polypropylene male connectors.  1/4" tube x 1/4" MNPT Flexible coiled hose assembly #TA-C4-PU (7'long).  1/4" OD blue polyurethane

For more options check out our complete selection of nitrogen spray guns for cleanrooms, labs, and manufacturing facilities.

TO ORDER NITROGEN SPRAY GUNS
To order nitrogen spray guns online, you can click above, email sales@cleanroomworld.com, or call customer service at (303)752-0076.

Shipping Instructions: The nitrogen guns can ship via UPS or FedEx. The order ships collect or prepay and add to the invoice. If shipping collect, add your freight account number in the “Comments Box” when checking out. Customer is responsible for the freight charge.

021121DB

 

 

Related Products


<