Prefabricated Softwall Cleanrooms: Modular, Vinyl Curtains, 10'x12', ISO Options, CAP-577-WR-10x12

Prefabricated Softwall Cleanrooms - Vinyl Curtains - 10'x12' - ISO Options - CAP-577F-WR-10x12

The prefabricated softwall cleanrooms are an affordable method of providing a quality controlled environment with low particulate counts. The prefabricated cleanrooms typically operate as a positive pressure enclosures, but can also be used as negative pressure containment areas. The portable cleanrooms are designed with HEPA filters to remove particles down to 0.3 microns at 99.99% efficiency.

The modular cleanrooms come with easy to assemble sections, with a maximum size of 12 feet x 12 feet, with a leg in each corner. Larger cleanroom units can be constructed by simply attaching standard softwall cleanroom components to create one continuous room with support legs on a 12'x12' pattern.  A 24 ft x 24 ft cleanroom would have one center post. The modular cleanrooms can be expanded or reduced in size without taking the entire clean room down.  This feature makes it fast and easy to add sections or change the shape for other requirements.  A number of smaller cleanrooms can be combined for a large cleanroom project and later be changed back to a smaller portable cleanroom and relocated.  If a larger cleanroom is required without center legs, choose the Series CAP-575 softwall cleanrooms. This model of modular cleanroom has 4”x4” angled steel beams to support the width of the cleanroom.

PREFABRICATED SOFTWALL CLEANROOMS GENERAL FEATURES
• 99.99% on 0.3 micron HEPA filters
• Aluminum frame HEPA filters
• Flat panel LED lights
• Clear vinyl curtains
• 120 volt filters and lights
• White painted finish

FILTERS & LIGHTS BY ISO CLASSIFICATION
ISO 5 Class 100 - (8) Filters (3) Lights
ISO 6 Class 1000 - (6) Filters (3) Lights
ISO 7 Class 10000 - (3) Filters (3) Lights
ISO 8 Class 100000 - (2) Filters (3) Lights

The prefabricated softwall modular cleanroom uses the CAP-119-H-SC (2x4) motorized ceiling HEPA filter, LED cleanroom lights and blank ceiling panels in various quantities, depending on the size and class of the cleanroom. The perimeter of the modular cleanroom is enclosed by clear vinyl curtains. These are easily attached to the portable clean room with 3M Dual Lock (cleanroom Velcro type material). Optional styles and materials for the cleanroom curtains included sewn cleanroom fabric, static dissipative material, or 13 mil yellow vinyl (for photolithography applications). The cleanrooms can be furnished with a prefab wiring kit for quick and easy connections of the filters and lights to a single junction box located on top of the prefabricated softwall cleanrooms.

PREFABRICATED SOFTWALL CLEAN ROOM CONSTRUCTION
The portable cleanroom frame is constructed of high-strength 2”x2” tubular steel with a white baked-enamel finish. The tubes are bolted together to form the upper frame assembly to which the tubular steel leg supports are attached. The modular cleanroom frame is lightweight, to allow the frame and components to be hand-lifted and assembled. One person can assemble the cleanroom, but it is easier to do with two people. The tubular steel frame is constructed to support the filters, lights, and blank panels. Tee bar dividers seal the space between the filters, lights, and blank panels.

PREFABRICATED SOFTWALL CLEANROOM CURTAINS
Standard portable cleanroom curtain is a Seiden Crystal brand, clear 40 mil, static dissipative, fire retardant vinyl with 3M Dual Lock strips sewn along the top for mounting. All standard cleanroom curtain dimensions are 54 inches x 90 inches’ x 40 mils thick. The modular cleanroom curtains overlap every 48”, which provides a 6” overlap, around the perimeter of the cleanroom. To enter or exit the cleanroom, the curtains are simply spread apart where they overlap. The cleanroom curtains automatically reseal as the two halves come back together.

PREFABRICATED SOFTWALL CLEANROOM STRIP DOORS
The strip door on the portable cleanroom consists of 8 inch x 80 mil thick vinyl strips, with 2 inch overlap on each side along the length. The standard strip door is 48” wide. The strips doors are shipped assembled, with mounting angle on top.

PREFABRICATED SOFTWALL CLEANROOM CEILING LIGHTS
The super lightweight 2’x4’ cleanroom LED light panels are easily installed by one person. These modern LED clean room lights provide higher illumination and non-glare lighting, versus the traditional white fluorescent light fixtures.  The cleanroom lights are set into the tee bar ceiling grid system. Gasketing provides the seal between the tee bar mounting surface and the light housing surface. Softwall cleanroom ceiling lights will be on their own separate electric circuit and will be controlled by a standard light switch. The ON/OFF switch is conveniently located on the leg outside the cleanroom curtain below the junction box.

PREFABRICATED SOFTWALL CLEANROOM CEILING HEIGHT REQUIREMENTS
The standard cleanroom height for these portable, modular clean rooms is 9 feet, with the additional 14 inches of the filter unit making it a total of 10’2”. A two inch minimum space is required between the top of the filter unit and the ceiling. This product code is for a cleanroom for 7 feet high or 100 inches overall height. Modular cleanrooms are available in any height to fit your cleanroom requirements.

PREFABRICATED SOFTWALL CLEANROOM ANTEROOM OR GOWNING ROOM
Anterooms (to perform pre-cleanroom procedures) or gowning rooms are modular and can easily be added to the portable cleanroom. Gowning room curtains are attached to the ceiling grid systems to provide a separate enclosed area inside of the modular cleanroom. Optional strip curtains can be ordered to replace a solid vinyl curtain.

PREFABRICATED SOFTWALL CLEANROOM CASTERS
Mobility can be added to these clean rooms by adapting them with the caster option. The portable cleanrooms would have heavy duty casters on the bottom of each leg.

PREFABRICATED SOFTWALL CLEANROOM PREFAB ELECTRIC WIRING KIT
The portable cleanroom prefab electric wiring kit is a cost-effective and time-saving option to conventional electrical wiring. It facilitates quick and easy “plug together” type electric connection of the lights and filter units. An electrician simply connects power to a single point junction box located on top of the clean room. The “plug together” male/female connectors included with the prefab wiring kit are Reloc brand connectors. They are designed to be repeatedly plugged and unplugged as necessary.

PREFABRICATED SOFTWALL CLEANROOM ELECTRIC JUNCTION BOX
The modular cleanroom electrical junction box receives power by being wired to your building’s electrical system. It is located on the top horizontal beam near the outside corner of the cleanroom.

PREFABRICATED SOFTWALL CLEANROOM FAN FILTER UNITS
The cleanroom CAP-119-424-H-SC fan filter units FFU will also be on their own separate 20 amp max. electric circuit (1.4 RLA per filter unit). Cleanroom filter units have a variable speed switch to designate low, medium, and high speeds. NOTE: Filter units and ceiling lights for the modular cleanroom will not be on the same circuit.

PREFABRICATED SOFTWALL CLEANROOM FEATURES
• Free spans up to 12 feet without adding a support leg or hanging point (delete the period)
• Modular bolt-together design simplifies both initial cleanroom assembly and future additions
• All frame components are painted in a durable and cleanroom-approved flat white powder coated finish
• 2’x2’ tubular steel legs - 14 gauge
• 2’ x 4' tubular steel beams - 11 gauge
• Aluminum T-bars with polyurethane foam gasket from the 2'x4' ceiling grid
• 12 gauge steel support gussets and 1/4 x 3/4 solid steel struts
• Transparent clear 40 mil flame retardant static dissipative curtains, attached to the frame with Dual Lock
• Adjustable steel leg leveling glides on each leg
• Modular clean room design offers great flexibility
• Cleanroom Classifications from ISO 8 Class 100,000 to ISO 4 Class 10
• Complete with motorized ceiling HEPA filters, lights and prefab wiring kit (requires only assembly and electric power connection)
• Fast delivery - most units shipped from stock

PREFABRICATED SOFTWALL CLEANROOM DESIGN OPTIONS
• Casters with brakes
• Gowning room - external additional or internal division for gowning
• Low out gassing sealant and/or gasket
• Ionization system
• Decorate shroud cover - painted steel or stainless steel
• Clear acrylic ceiling tile

QUICK SHIP ON PREFABRICATED CLEANROOMS - 

• Model CAP-577 portable cleanroom parts are in stock and ship in 15 to 20 business days, after receipt of signed approval drawings.

Outside Dimensions: 122 5/8"W x 146 3/4" 
Inside Dimensions: 118 5/8"W x 142 3/4"L
Clearance to Underside of Beam: 4" shorter than inside room height

Floor anchors are included if the cleanroom legs need to be anchored to the floor. See photo above.

Product Code: CAP-577-WR-10x12  Prefabricated Softwall Cleanrooms, 10'x12', 40 mil Perimeter Clear Vinyl Curtains, Prefab Wiring Kit w/20 Ft Power Cord, Blank Ceiling Panels. Includes: Prefab wiring for filters, lights and light switch. Electrical: (1) power cord - 20 ft, 120V, 60 Hz, 20 Amp, NEMA 5-20P

ORDER SOFTWALL CLEANROOMS 
To order a softwall cleanrooms, click tab above call customer service at (303) 752-0076 or email sales@cleanroomworld.com 

Shipping Instructions: The softwall cleanroom price does not include freight.  The order ships on a motor freight carrier and the cost of shipping will be added to your order. Customer service will call or email you after the order is placed to give you the option of shipping the cleanroom collect on your account.  Indicate to customer service if your facility will require a liftgate or if you have a dock high receiving area. Please include delivery point of contact name and phone number. 

Check out our large selection of modular cleanrooms, portable cleanrooms, softwall cleanrooms and hardwall cleanrooms.

Click here to see our large selection of softwall cleanrooms.

100124CW