Skip to main content

Heat Sealers, Table Top, Electric Foot Switch, Cutter, Impulse, Seal Length: 32.5", AV-821-MGMI

Starting at $2,764.50
(No reviews yet) Write a Review
Product Code:
Heat Sealers - Table Top - Electric Foot Switch Operation - Impulse - Medium Duty - Cutter - 32" Seal Length - AV-821-MGMI

The heat sealer is designed for medium duty applications which would require sealing up to a few thousand polyethylene, polypropylene and other film laminates bags per day. This impulse heat sealer is equipped with a magnetic hold down device that ensures consistent seals independently of the operator. A special features of the heat sealer is that it can be operated by hand or with an optional foot pedal. Other models are motorized to automatically close the seal bars with the gentle push of the pedal.  This heat sealer can work with pre-made bags or tubing. The machine can produce various lengths of bags by using the integrated cutter. Easy maintenance allows the seal bar to be replaced in less than a minute.

Sealing cycle is started by pushing down the seal bar or by using the optional foot pedal.  The magnetic bars remain closed throughout the sealing and cooling cycle and then automatically open.

•  Seal length: 32.5 inches
•  Seal width: 3/16"
•  Independent seal and cool timers
•  Long life cutting blade
•  Maximum film thickness (PE): 2 x 8 mil
• Electrical requirement: 115V
•  3 year limited warranty
•  Electric Foot Switch Operation

•  Twin seal
•  Code seal (text embossed in the seal)
•  Stand with mechanical foot pedal (SP)
•  Work shelf with bag support (OTST)
•  Rolloflux table top roll holder for poly tubing (RL)
•  Set of rollers for stand to hold poly tubing (SR)
•  Stainless steel housing 

•  Standard Seal: 3 mm wide
•  Twin Seal #MG(M)T:  Two parallel sealing bars with the cutter slicing the film between the two sealing bars. The second seal bar can be switched off allowing the machine to be used with a single seal.
•  Industrial Seal #MGMI: 5 mm wide, sealing wire is fastened with tensioners to prevent distortion
•  Bi-active #MGMDIS: Two sealing bars, one in the arm and one in the machine.  Provides a more powerful seal which can seal thick films up to 2 x 0.25 mm.

Sealmaster Magneta 321 – 12.5″ seal length 
AV-321-MG - standard

Sealmaster Magneta 421 – 16.5″ seal length
AV-421-MG - standard
AV-421-MGM - motorized operation
AV-421-MGT - twin seal
AV-421-MGS - stainless steel

Sealmaster Magneta 621 – 24.5″ seal length
AV-621-MG - standard
AV-621-MGM - motorized operation
AV-621-MGT - twin seal
AV-621-MGS - stainless steel

Sealmaster Magneta 821 – 32″ seal length
AV-821-MGI - standard
AV-821-MGMI - electric foot switch operation

Sealmaster Magneta 1021 – 40″ seal length
AV-1021-MGI - standard
AV-1021-MGM - motorized operation

Product Code: AV-821-MGMI - Impulse Heat Sealer, Table Top, Electric Foot Switch Operation, Seal Length: 32.5", Cutter, Medium Duty

For more options, visit our main Heat Sealers section.

To order a heat sealers, you can click above, call customer service at (303)752-0076 or email 

Shipping Instructions: The heat sealer ships on a motor freight carrier and the cost of shipping will be added to your order. The order ships collect or prepay and add to the invoice. If shipping collect, add your freight account number in the “Comments Box” when checking out. Customer is responsible for the freight charge. 

In addition to heat sealers, we also offer a variety of other cleanroom packaging supplies, including cleanroom tape, cleanroom bags


Related Products