Air Showers; Crystalline Silica Removal, Portable, Stainless Steel or Painted Metal, CAP-701LP-CS-4248-SST

Air Showers - Crystaline Silica Removal - Portable - Stainless Steel or Painted Steel

The air shower is a self contained air circulation system which is installed at the entrance to a controlled environment to reduce contamination as workers enter or exit the production space. The air shower is a valuable health and safety piece of equipment used in various industrial activities that produce crystalline silica.  The material is invisible to the naked eye and when inhaled causes serious if not fatal illness such as silicosis, tuberculosis infection and kidney disease. High velocity air removes the particles from the garments before workers can exit the area. 

AIR SHOWER GENERAL OPERATIONS
The air shower produces high pressure air, filters this air through a HEPA/ULPA filter, then flows the air through adjustable nozzles which exit at a high velocity. The air is then recirculated back to the high pressure blower, where it is prefiltered then HEPA/ULPA filtered and ducted back to the adjustable high velocity cleaning nozzles. The Series 701 provides approximately 1900 CFM total. With this high air flow volume (power) and the high nozzle velocity (force), the people inside the air shower are cleaned faster and more effectively. There are 32 adjustable air nozzles in each standard air shower section - 16 per side. The nozzles are aluminum with a clear anodized finish. They have a 1.2 inch inside diameter, with approximately 7800 LFPM (9000 LFPM peak) nozzle velocity.

AIR SHOWER STAINLESS STEEL SHELL 
With the stainless steel shell option, the shell of the exterior and interior air shower is stainless steel. Parts located in the blower compartment behind the interior access panel, i.e. blower, motor, filter support clamps, etc are standard painted or plated materials and not stainless steel.

AIR SHOWER DOOR OPTIONS
Door options include: double doors, power swing, stainless steel frame, power sliding and painted steel with viewing window. The air showers can be furnished without a door on one end so the unit can butt against an existing door. A door interlock magnet can be shipped loose for field mounting. When interfacing with an existing or sliding door, the air shower can be furnished with a dry contact to automatically open the door at the end of the cleaning wait cycle.  A kick plate in lower half of glass doors, yellow safety acrylic versus clear glass.

AIR SHOWER LOW PROFILE OPTION
The Series 701LP has an overall assembled height of 95 inches. The unit has the blower assembly, HEPA filter, and electrical components mounted on the side to permit the lower height. It can be assembled in a space 96" high, making it ideal for retrofits or areas where penetrating the ceiling is undesirable. The unit is shipped disassembled to the point that all parts will fit through a standard doorway. Service access to the blower assembly, filters and electrical components is through two doors on each end of the unit.

Pictured Air Shower Options:
• Special Configuration
• Straight Thru
• Low Profile
• Single Door
• Stainless Steel Walls and Cabinet - Type 304 #4 Finish
• Portable Design with Casters and Power Cord
• 48" Outside Depth

AIR SHOWER GENERAL FEATURES
•  Durable and cleanroom approved painted cold rolled steel shell
•  No silicone used - only low outgssing epoxy or urethane sealant
•  (2) anodized aluminum framed safety glass doors with hydraulic door closers
•  (1) LED recessed light fixture with wall switch
•  (2) removable high pressure interior nozzle wall panels
•  (1) 5HP (3.7kW), 3600 RPM sealed ball bearing continuous duty motor (motor meets or exceeds US EP Act and NRCan Canadian efficiency standards)
•  (1) superior efficiency direct drive aluminum air foil wheel 
•  7800 FPM (39.62 m/s) average nozzle velocity
•  1900 CFM (0.9 m3/s) Average
•  (1) 24x24x11.5, 99.97% HEPA filter
•  (4) wall return air grills with 10x20x1 MERV 8 Prefilters
•  (1) 2½ inch diameter sprinkler sleeve
•  Programmable microprocessor PLC with 0-30 second adjustable run time and 0-10 second adjustable wait time
•  UL508A panel sticker
•  CSA Listed (selected models)
•  208 Volt, 60 Hz, 3 Phase, 4 wire, 14.5 FLA

AIR SHOWER OUTSIDE WIDTH OPTIONS
•  50 inch (36 inch single doors) (standard)
•  56 inch (42 inch single doors
•  62 inch (48 inch single doors)

AIR SHOWER DEPTH OPTIONS
•  54 inch (standard)
•  72 inch 

AIR SHOWER NOZZLE OPTIONS
•  Fixed nozzles 
•  Concentrated wall nozzle pattern 
•  Air knife design 
•  Rub rail nozzle protection 
•  Wall point ionization system 

AIR SHOWER GENERAL OPTIONS
•  Raised floor return
•  Hazardous location design
•  Type 304 #4 finish stainless steel pharmaceutical package

AIR SHOWER FILTER OPTIONS
•  ULPA upgrade to 99.999% on 0.12 micron particles 
•  Additional pre-filter on blower
•  Magnehelic gauge - single
•  Magnehelic gauge - dual

AIR SHOWER SHELL OPTIONS
•  Powder coated painted cold rolled steel (standard white) (standard)
•  Powder coated painted cold rolled steel (customer specified)
•  Type 304 #4 finish stainless steel walls and cabinet
•  Type 316L 2b finish stainless steel walls and cabinet

There are many options which can be designed into the air shower. Please call to discuss your requirements and pricing.

For more options, visit our main section for cleanroom air showers.

TO ORDER AIR SHOWERS
To order an air showers, you can click above, please call customer service at (303)752-0076 or email sales@cleanroomworld.com 

Shipping Instructions: The air shower price does not include freight. The air shower ships on a motor freight carrier and the cost of shipping will be added to your order. Customer service will call or email you after the order is placed to give you the option of shipping the air shower collect on your account.  Indicate to customer service if your facility will require a lift gate or if you have a dock high receiving area. Please include delivery point of contact name and phone number. 

In addition to air showers, we also offer a variety of other cleanroom equipment, including motorized shoe cleaners, Particle counters, and modular cleanrooms.

6120