Description Chemical Suits - Kappler Zytron 200 Increased Resistance - Coverall - Elastic Wrist/Ankles - Bound Seams - Gray - Size: XS-4XL - KA-Z2B417 Kappler Zytron 200 has an increased protection level through increased resistance to a wider range of chemicals and greater physical strength. Coveralls are strong and durable to provide protection in applications where rip-out is a concern. Color is GrayKAPPLER ZYTRON 200 SEAM TYPESThe best protective garments in the world are useless without strong, tight seams. Just one loose thread or gap, and the barrier of protection can unravel and leave you vulnerable to injury- or worse. Kappler offers four different seam types for its protective garments. Depending on the fabric and final application, users may specify:• Serged seams for general protection• Bound seams in the mid-range• Heat Sealed/Taped seams for high-end chemical protection• Ultrasonic seams for biohazard or nuclear applicationsKAPPLER ZYTRON 200 SPECIAL FEATUREZytron ChemScan™ garment label is on the front of each garment. Scan the label with your mobile phone's QR reader for immediate access to a complete list of chemicals tested against your garment's protective fabric. Quick, accurate and only from Kappler. KAPPLER ZYTRON 200 COVERALL AVAILABLE STYLES• Plain, elastic wrists/ankles, and attached hoods and/or boots• Hooded styles include elastic face opening with extended chin protection• Seams are available bound or heat sealed/taped seams for additional protection• Bound seam styles include storm flap with pressure sensitive tape closure Kappler Zytron 200 Coverall Product Codes and SizesKA-Z2B417-XS Bound Seams Extra Small 12/CaseKA-Z2B417-SM/MD Small/Medium KA-Z2B417-LG/XL Large/XLKA-Z2B417-2X/3X 2X/3XKA-Z2B417-4X 4XKA-Z2B417-5X 5XKA-Z2H417-XS Heat Sealed/Taped Seams Extra Small 6/caseKA-Z2H417-SM/MD Small/MediumKA-Z2H417-LG/XL Large/XLKA-Z2H417-2X/3X 2X/3XKA-Z2H417-4X 4XKA-Z2H417-5X 5XProduct Code: KA-Z2B417 Kappler Zytron 200 Coveralls, Zipper Front Collar, Elastic Wrists and Ankles, Bound Seams, Gray, XS-4XL, 12/Case 110920 KAPPLER TECHNICAL DATAASTM F1001 Chemical Test Battery CHEMICAL Zytron®200 Acetone 17 Acetonitrile 52 Carbon Disulfide 2 Dichloromethane 2 Diethylamine 21 Dimethylformamide 77 Ethyl Acetate 14 n-Hexane 7 Methyl Alcohol >480 Nitrobenzene 97 Sodium Hydroxide >480 Sulfuric Acid >480 Tetrachloroethylene 21 Tetrahydrofuran 3 Toluene 6 GASES Ammonia Gas NT 1,3 Butadiene NT Chlorine Gas NT Ethylene Oxide Gas NT Hydrogen Chloride Gas NT Methyl Chloride Gas NT Typical Physical Properties(measured per ASTM D751) TEST METHOD Zytron®200 Grab Tensile Strength MD* 52 / 231 Grab Tensile Strength CD* 39 / 173 Tear Resistance MD* 22.9 / 101.8 Trapezoid Method CD* 9.6 / 42.7 Ball Burst 43 / 191 Sources for all test data are independent laboratories. All tests were performed under laboratory conditions and not under actual use conditions. NOTE: These tests were performed in accordance with ASTM standards by independent laboratories. This data is derived from tests performed on material samples only, not finished garments. WARNING: There are uses, environments and chemicals for which these garments and/or fabrics are unsuitable. It is the responsibility of the user to review available data and verify that the garment and/or fabric is appropriate for the intended use and meets all specified government industry standards. CAUTION: Do not use for fire protection. Avoid open flame or intense heat. *MD - Machine Direction, CD - Cross Direction For more options, visit the main Cleanroom Garment section.