Staticide® Stripper 4010 Acrylic Floor Finish Remover, ESD Floor Cleaner, 1 Gallon, ACL-4010-1

ACL Staticide 4010 Acrylic Floor Finish Remover - ESD Floor Cleaner - Gallon - ACL-4010-1

The ACL Staticide^® Stripper 4010 Acrylic Floor Finish Remover provides a completely clean and finish ready surface for Staticide Floor Finishes. Effective in hard or soft water, this biodegradable, low foaming formula emulsifies and removes multiple coats of floor finishes and embedded dirt without damaging or dulling floors. When used at proper dilutions, Staticide Stripper is pH balanced so that neutral cleaning is not necessary.

This low odor, solvent safe surfactant solution is less corrosive than other commercial strippers and is formulated without the use of environmental pollutants common in other cleaners and strippers. It is safe to use on a variety of surfaces including vinyl tiles and concrete. Staticide Stripper 4010 Acrylic Floor Finish Remover will not damage or dull flooring when used according to manufacturer's recommendations.

ACL STATICIDE STRIPPER 4010 ACRYLIC FLOOR FINISH REMOVER APPLICATIONS
• Regular maintenance of ESD flooring
• Preparing unfinished surfaces for Staticide Floor Finishes
• Stripping Staticide Floor Finishes according to the strip cycle

ACL STATICIDE STRIPPER 4010 ACRYLIC FLOOR FINISH REMOVER PRODUCT FEATURES
• Biodegradable, non-toxic, non-corrosive formula
• Dilution ratio: 1:4 (stripper to water)
• Zero tribogeneration
• 5% Solids
• Low V.O.C. -6%
• Effective in hard or soft water
• No acid, ammonia, or phosphates

ACL STATICIDE 4100 RESTORER CLEANER CLEANING PROCESS
Sweep floor with an untreated dry mop. Dilute Staticide^® 4100 Restorer Cleaner 10:1 (10 parts water to 1 part concentrate). Using a clean lint-free mop, apply a thin coat of mixed solution to the ESD floor finish. Saturated mop and wring out excess cleaner, so that the floor is not over saturated with moisture. Remove soiled solution. Allow floor to dry one hour before resuming traffic. For auto scrubbers, gently scrub using diluted solution and clean polishing pad. Use 1500-2000 RPM with a light pressure setting to prevent removal of finish. Check resistance readings and apply a second treatment if necessary. Consult maintenance procedures for details and precise instructions. 

INGREDIENT COMMUNICATION STATEMENT
Water Solvent
Ethanolamine plasticizer
Butoxyethanol solvent
Sodium Metasilicate emulsifier
C9-11 Alcohols Ethoxylated surfactant

Product Code: ACL-4010-1  ACL Staticide^® Stripper 4010 Acrylic Floor Finish Remover, 1 Gallon, 4 Gallons per Case

ORDER ESD FLOOR STRIPPER
To order the ESD floor stripper, click tab above, call customer service at (303) 752-0076, or email sales@cleanroomworld.com

Shipping Instructions: The ESD floor stripper can ship via UPS or FedEx. The order ships collect or prepay and add to the invoice. If shipping collect, add your freight account number in the "comments box" when checking out. Customer is responsible for the freight charge.

080725CW