Skip to main content

Kappler Zytron 200 Sleeves, Elastic at Both Ends, 18" Long, Heat Sealed/Taped Seams Gray, One Size, 50 Pairs/Case, KA-Z2H501

Starting at $304.62
(No reviews yet) Write a Review
Product Code:
KA-Z2H501
Chemical Sleeves - Kappler Zytron 200 - Increased Resistance - 18" Long - Heat Sealed Taped Seams - Gray - One Size - 50 Pairs/Case -  KA-Z2H501

Zytron 200 ups the protection level through increased resistance to a wider range of chemicals and greater physical strength. Heat sealed taped seams is an excellent choice for high end chemical protection. Color is Gray

KAPPLER ZYTRON 200 SEAM TYPES
The best protective garments in the world are useless without strong, tight seams.  Just one loose thread or gap, and the barrier of protection can unravel and leave you vulnerable to injury - or worse.  Kappler offers four different seam types for its protective garments. Depending on the fabric and final application, users may specify:
•  Serged seams for general protection
•  Bound seams in the mid-range
•  Heat Sealed/Taped seams for high-end chemical protection
•  Utrasonic seams for biohazard or nuclear applications

Product Code: KA-Z2H501   Kappler Zytron 200 Sleeves, Elastic at Both Ends, 18" Long, Heat Sealed Taped Seams, Gray, One Size, 50 Pairs/Case

For more options, visit our main Kappler Zytron 200 Chemical Suits section.

TO ORDER KAPPLER CHEMICAL SLEEVES
To order Kappler chemical sleeves online, you can click above, call customer service at (303)752-0076, or email sales@cleanroomworld.com

Shipping Instructions: The Kappler chemical sleeves can ship via UPS or FedEx. The order ships collect or prepay and add to the invoice. If shipping collect, add your freight account number in the “Comments Box” when checking out. Customer is responsible for the freight charge. 

In addition to Kappler Zytron 200 chemical sleeves, we also offer Kappler Zytron 100Kappler Zytron 300, and Kappler Zytron 500

 

KAPPLER TECHNICAL DATA
ASTM F1001 Chemical Test Battery
CHEMICAL
Zytron®
200
Acetone
17
Acetonitrile
52
Carbon Disulfide
2
Dichloromethane
2
Diethylamine
21
Dimethylformamide
77
Ethyl Acetate
14
n-Hexane
7
Methyl Alcohol
>480
Nitrobenzene
97
Sodium Hydroxide
>480
Sulfuric Acid
>480
Tetrachloroethylene
21
Tetrahydrofuran
3
Toluene
6
GASES
 
Ammonia Gas
NT
1,3 Butadiene
NT
Chlorine Gas
NT
Ethylene Oxide Gas
NT
Hydrogen Chloride Gas
NT
Methyl Chloride Gas
NT
Typical Physical Properties
(measured per ASTM D751)
TEST METHOD
Zytron®
200
Grab Tensile Strength MD*
52 / 231
Grab Tensile Strength CD*
39 / 173
Tear Resistance MD*
22.9 / 101.8
Trapezoid Method CD*
9.6 / 42.7
Ball Burst
43 / 191

Sources for all test data are independent laboratories. All tests were performed under laboratory conditions and not under actual use conditions.

NOTE: These tests were performed in accordance with ASTM standards by independent laboratories. This data is derived from tests performed on material samples only, not finished garments.

WARNING: There are uses, environments and chemicals for which these garments and/or fabrics are unsuitable. It is the responsibility of the user to review available data and verify that the garment and/or fabric is appropriate for the intended use and meets all specified government industry standards.

CAUTION: Do not use for fire protection.
Avoid open flame or intense heat.

*MD - Machine Direction, CD - Cross Direction

 

 

Related Products


<