Skip to main content

Dust Monitors, Indoor, Portable, ME-BT-645

Starting at $3,183.00
(No reviews yet) Write a Review
Product Code:
ME-BT-645
Bench Top Particle Counter - Battery Operated - Six Selectable Size Channels - Built in Printer - Portable Stainless Steel Case - ME-BT-645

The ME-BT-645 is a compact battery operated particle counter with 6 selectable size channels, built in printer, in a portable stainless steel case. Flow rate is 1.0 cfm (28.3 lpm) and is maintained with volumetric flow control.  Has a large size display with very large characters, audio alarm, and internal printer that work together to verify particulate levels. If the particle count exceeds a pre-set limit, the audible alarm will beep, the screen display will flash and the printer will print the alarm value. Two programmable count alarm limits may be set. Six programmable particle size ranges (0.3 to 10 microns. Store over 8,000 sample events. Sample history events can be viewed or printed and download to a computer using Particle View software or simple ASCll terminal commands. Connectivity is built in for both digital (RS-232, RS-485) and analog output (0-5 VDC). The ME-BT-620 also includes a memory stick port. The printer has two modes of operation. print sample, and recall data. Convenient size and lightweight for portability with full feature set for desk top operation. Built in battery provides 8 hours of typical use and 4 hours of continuous. Connect the AC adapter/charger for longer operation and battery charging. A plug and play option can immediately add ambient temperature and relative humidity capabilities to displayed and logged data.

PARTICLE COUNTER FEATURES
•  Real-Time Monitoring
•  Simple Operation
•  Built-in Data Logger
•  Pure Air System
•  Low power Consumption

Optical Sensor
A laser optical sensor is used to detect and measure particulate concentrations up to 100 milligrams per cubic meter. The continuous flow optical sensor is combine with purge air to ensure accurate measurements in adverse environments

Rugged Design
The optical sensor, matched electronics and back-lit display are enclosed in a rugged metal enclosure to protect the instrument from normal daily use.

Data Storage
The internal data-logger will store over 28,000 samples. Sample history events can be viewed on the display or downloaded to a computer using Comet software.

Battery Operation
The internal battery pack provides over ten hours of continuous operation. Battery recharge time is approximately 2.5 hours.

Optional Inlets
The standard unit is supplied with a TSP inlet. Optional sampling inlets are available for PM2.5, PM1, and PM10.

HANDHELD PARTICLE COUNTER SPECIFICTATIONS

INTERFACE

 Display

 20 character x 4 line LCD

 Keyboard 

 6-key membrane type

PERFORMANCE 

 Concentration Range

 0 to 100 mg/m3 (0 to 100,000 µg/m3)

 Accuracy

 5% traceable to standard with 0.6 µm PSL

 Sensitivity

 1 µg/m3

 Flow Rate 

 2 LPM

 Measuring Time

 1, 5, 10, 15, 30 and 60 minutes

ELECTRICAL

 Light Source

 Laser diode, 5 mW, 670 nm

 Battery Life

 14.8V Li-ion (Lithium Ion) battery pack

 AC Adapter/Charger

 Over 10 hours continuous operation

 Communications

 Li-ion battery charger, 100 – 240 VAC, 50/60Hz to 16.8 V @ 1.8 A RS‐232, USB

 Data Storage

 Over 28,000 samples

PHYSICAL

 Weight

 3.7 lbs. (1.7 kg)

 Size

 Height = 4.25” (10.8 cm) Width = 7.44” (18.9 cm) Thickness = 3.25” (5.4 cm)

ENVIRONMENTAL

 Operating Temperature  0º C to +50º C º
 Storage Temperature  -20 C to +60º C
 Relative Humidity  90% (non-condensing)


•  Supplied
 
- User Manual
                           USB Cable
                           Communications Software (Comet)
                           AC Adapter / Battery Charger
                           Calibration Certificate
                           Zero Filter Assembly
                           Li-ion Smart Charger w/ Power Cord
                           Sample Inlet (TSP)


•  Optional - PM2.5 Sharp Cut Cyclone
                          PM10 Sharp Cut Cyclone
                          PM1 Sharp Cut Cyclone
                          Custom Serial Cable

ACCEPTABLE APPLICATIONS
•  Public & Workplace Monitoring
•  Industrial/Occupational Hygiene
•  Indoor Air Quality

Product Code: ME-BT-645 - Air Quality, Bench Top, Particle Counter, Printer, Portable, Battery Operated, Data Storage and Connectivity.

For more options, visit our main section for cleanroom particle counter equipment.

TO ORDER BENCH TOP PARTICLE COUNTERS
To order the bench top particle counters, you can click above, email sales@cleanroomworld.com, or call customer service at (303)752-0076.

Shipping Instructions: The bench top particle counters can ship via UPS or FedEx. The order ships collect or prepay and add to the invoice. If shipping collect, add your freight account number in the “Comments Box” when checking out. Customer is responsible for the freight charge

In addition to particle counters, we also offer a variety of Cleanroom Equipment, Including: Nitrogen Spray Guns, Temperature / Humidity Chambers, and UV Disinfection Equipment

070822CW

 

 

Related Products


<